Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, T2, N1 Pro, X4 Cameras Description
Explore the new frontier of home beer brewing with a century-old recipe and enjoy its rich, aromatic flavor right in your own kitchen.Americaâs original craft brewer, Yuengling Beer has been a proud American icon since 1829. ` Vantrue N2 Pro Uber Dual Dash Cam Vantrue T2 Supercapacitor Dash CamVantrue N1 Pro Dash CamVantrue N2 Uber Dual Dash Cam Vantrue X4 4K Capacitor dash cam Resolution Dual:1920*1080 60fps, Single Front 1920×1080 60fps or 2560×1440 30fps1920x1080 30fps1920X1080 30fpsDual:1440×1080 30fps+1280×720 30fps, Single Front 1920×1080 30fps 4K 3840X2160P 30fps, 2560X1440P 60fps 2560×1440 30fpsLensF/1.8,170Â°+ F/2.0, 140Â° F/1.8, 160Â° F/1.8, 160Â°F/2.0, 170Â°+ F/2.0, 140Â° F/1.8, 160Â°Camera TypeFront+InsideFrontFrontFront+InsideFrontDisplay1.5â inch 2â inch1.5â inch1.5â inch3â inchMicrophone & Speaker Built-in Built-in Built-in Built-in Built-inStorageUp to 256GB MicroSD CardUp to 256GB MicroSD CardUp to 256GB MicroSD CardUp to 64GB MicroSD CardUp to 256GB MicroSD CardBattery & ChargingBuilt in batterySupercapacitorBuilt in batteryBuilt in batterySupercapacitorGPS LoggerOptionalOptionalOptionalOptionalOptional Read more Key Features 24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Directly to the ignition wire for power only so it can turn on and off with the ignition. Compatible 12 â 24V Vehicles This hardwire kit accepts voltage from any type of vehicles runs on 12 â 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. Low Voltage Protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.4V(12V cars) or 22.8V(24V cars), thus preventing it draining the battery. Read more Installation Instruction Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on. Connect the Red Wire Once you’ve determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation. Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards. Read more Key FeaturesCompatible with 12-24Vdc for car or truck installations. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, N1 Pro, T2, X4, X3, X1 and all the other mini usb dash cams! Keep 12V or 24V outlet free, charge your phone at the same time.Less static when youâre listening to the radio. Less Complicated Install with the installation video. Whatâs in the boxVantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User ManualMini/LP ACN Add-A-Circuit Fuse HolderMini ACS Add-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit Fuse Holder Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 1.5A Working Temperature: -22Â°F to 167Â°F (-30Â°C to 75Â°C) Cable Length: 11.5ft Low Voltage Protection: 11.4V for 12V vehicle; 22.8V for 24V vehicle. Read moreSamsung Galaxy S10 S10 S10e S9 S9 S8 S8 Note 9 Note 8 Note 7. Be aware cellphone holder can t match the cellphone with battery case, assist most zero. 2 the 3m tape could not match for some dashboards. It is more stable than the round EASY INSTALLATION Benefit from the special design of the clamp, this car magnetic phone holder is quite easy to install, just need to put it on the car s outlet blades and adjust the length of clamp by turning the knob to match the outlet. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness. The name Lamicall comes from a concept called Let Me Call. Options robust suction cup that may maintain your system regular so you ll be able to hold your give attention to the highway and your palms on the steering wheel.